Industrial Models Archives - MARINE https://marineqatar.com/product-category/water-heater/industrial-models/ TRADING & CONTRACTING Tue, 28 Dec 2021 06:00:39 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://marineqatar.com/wp-content/uploads/2021/10/cropped-site-icon-32x32.png Industrial Models Archives - MARINE https://marineqatar.com/product-category/water-heater/industrial-models/ 32 32 ST https://marineqatar.com/product/st/ Tue, 10 Aug 2021 06:27:48 +0000 https://marineqatar.com/?post_type=product&p=3312
  • Range of storage tanks
  • 300 – 2820 liter capacity

    • The post ST appeared first on MARINE.

    ]]>
  • PermaGlas Ultra Coat second-generation glass coating technology prevents corrosion
  • Insulated ring base
  • Insulated access cover for comprehensive waterside maintenance
  • Replaceable magnesium anode
  • Options:
    – Flexible magnesium anode for installation in confined areas
    – Powered anode for reduced maintenance requirements
    – Temperature and pressure valve with stainless steel spring set to 95°C and a maximum water pressure of (7 bar) 700 kPa
    – Analogue temperature gauge (0-120°C)
    – Destratification pump kit
    – Flowstore heat pack

    • The post ST appeared first on MARINE.

    ]]>         Collector https://marineqatar.com/product/collector/ Tue, 10 Aug 2021 06:21:23 +0000 https://marineqatar.com/?post_type=product&p=3307
  • Solar thermal collectors
  • Available for building on roof or in roof, flat roofs (frame) and wall mounting (frame)
  • Optional drain back system

    • The post Collector appeared first on MARINE.

    ]]>
  • Approved by EN12975-2-2006 and Solar Keymark certified
  • Temperature resistant up to 200ºC
  • Installation options: roof unit (SPBO), built into the roof (SPBI), flat-roof mounting console (SPFR), wall-mounted console (SPWL)
  • Simple installation system even with multiple collectors
  • The system is supplied with all parts needed for complete installation
  • The entire package is available as a single order number
  • Patented drainback system to prevent stagnation temperature is available as an accessory
  • Sets are available in two versions: with copper absorber and meander, or with copper absorber and aluminum meander
  • Frame construction collectors can be delivered with or without concrete blocks
  • All sets can be delivered in horzontal or vertical aligned collectors
  • Can be set up with up to 15 collectors

    • The post Collector appeared first on MARINE.

    ]]>         ITES https://marineqatar.com/product/ites/ Tue, 10 Aug 2021 06:19:17 +0000 https://marineqatar.com/?post_type=product&p=3305
  • Solar/electric water heater for industrial and applications
  • 15 – 60 kW input
  • 1000 – 2820 liter capacity

    • The post ITES appeared first on MARINE.

    ]]>
  • Solar/electric water heater for industrial and commercial applications
  • Carbon steel tank with ultra coat glass lining
  • Maximum working pressure 7 bar
  • Manhole 400mm
  • T&P relief valve factory supplied
  • Factory installed 100mm insulation with ABS jacket, meeting new Ecodesign standards in Europe
  • Electric back-up heating with incoloy sheeted elements (15 to 60 kW)
  • Factory mounted control panel including main power disconnect door interlock switch, transformer for 230 Volt control circuit, contactors, solar control panel, step indication lights and override switch, immersion control and hi-limit thermostat

    • The post ITES appeared first on MARINE.

    ]]>         HWG https://marineqatar.com/product/hwg/ Tue, 10 Aug 2021 06:16:14 +0000 https://marineqatar.com/?post_type=product&p=3302
  • Hot water generators available for operation with steam or boiler water
  • Custom units built to order
  • Up to 5,000 gallon capacity

    • The post HWG appeared first on MARINE.

    ]]>
  • Hot water generators are available in space saving vertical or horizontal models
  • Custom units built to order, with tank capacities up to 5,000 gallons, with special control trim, and with special heating units can be built to design specifications on special order basis. Standard units listed in this brochure cover most standard orders
  • All internal surfaces exposed to water are glasslined per ASME HLW procedures, using an NSF 61-approved glasslining compound
  • Glass is highly resistant to effects of temperature, corrosion and electrolysis
  • The HWG systems meet or exceed the thermal efficiency and standby loss requirements of the U. S. Department of Energy and current edition ASHRAE/IESNA 90.1.
  • The standard system will employ an ASME ”HLW” code glasslined storage tank fitted with an ASME “U”code 3/4” diameter copper tube heat exchanger
  • The standard HWG system will employ circulator pump. The heat exchanger sizing tables are also based on using integral circulators
  • Standard HWG consists of ASME HLW Code storage tank rated 125 psig working pressure with U Code heat exchanger, temperature & pressure relief valve, temperature & pressure gauge in tank, drain valve and lifting lugs
  • Standard HWG systems employing glass or optional cement lined, lined tanks are fitted with anodes as corrosion protection
  • Options for boiler water system:
    – Boiler water temperature gauge
    – Standard boiler water trim, includes 2-way temperature inlet y-strainer control valve, isolation valves
  • Options for steam system:
    – Standard steam trim consists of temperature control valve, 1 steam trap on condensate line, inlet and outlet strainers
    – Electric operated valve
    Options for both boiler water and steam system:
    – Electronic control package with BMS integration
    – Electric high limit safety system, three-way controls with bypass. ASME rating
    – Low water cutoff, 12×16 vessel manway, 4×6 vessel hand hole
  • Warranty: 5 years on the tank, 1 on parts. For details, please refer to the instruction manual

    • The post HWG appeared first on MARINE.

    ]]>         ITE https://marineqatar.com/product/ite/ Tue, 10 Aug 2021 06:14:06 +0000 https://marineqatar.com/?post_type=product&p=3300
  • Indirect calorifier solar
  • 78 – 154 kW output
  • 385 – 1007 liter capacity

    • The post ITE appeared first on MARINE.

    ]]>
  • Single-wall spiral heat exchanger
  • PermaGlas Ultra Coat second-generation glass coating technology prevents corrosion
  • Insulated ring base: 70-100mm NEODUL insulation with ABS cover, compliant with Ecodesign regulations
  • Insulated access cover for comprehensive waterside maintenance
  • Replaceable magnesium anode
  • Temperature and pressure valve with stainless steel spring set to 95°C and a maximum water pressure of (10 bar) 1000 kPa
  • Options:
    – Analogue temperature gauge (0-120°C)
    – Electric element heat packs (max 2 x 7,5 kW) flange mounted

    • The post ITE appeared first on MARINE.

    ]]>         ITS https://marineqatar.com/product/its/ Tue, 10 Aug 2021 06:11:49 +0000 https://marineqatar.com/?post_type=product&p=3298
  • Dual coil indirect calorifier for a wide range of applications
  • 37 – 80 kW output
  • 382 – 1007 liter capacity

    • The post ITS appeared first on MARINE.

    ]]>
  • Single-wall spiral heat exchanger
  • PermaGlas Ultra Coat second-generation glass coating technology prevents corrosion
  • Insulated ring base for easy installation
  • Insulated access cover for comprehensive waterside maintenance
  • Replaceable magnesium anode
  • Options:
    – Flexible magnesium anode for installation in confined areas
    – Powered anode for reduced maintenance requirements
    – Temperature and pressure valve with stainless steel spring set to 95°C and a maximum water pressure of (7 bar) 700 kPa
    – Analogue temperature gauge (0-120°C)
    – Destratification pump kit
    – Electric element heat packs (3 – 36 kW). Electric back-up heating up to 7.5 kW

    • The post ITS appeared first on MARINE.

    ]]>         IT https://marineqatar.com/product/it/ Tue, 10 Aug 2021 06:09:57 +0000 https://marineqatar.com/?post_type=product&p=3296
  • Indirect water heater (calorifier) for a wide range of applications
  • 46 – 156 kW output
  • 300 – 2800 liter capacity

    • The post IT appeared first on MARINE.

    ]]>
  • Single-wall spiral heat exchanger
  • PermaGlas Ultra Coat second-generation glass coating technology prevents corrosion
  • Insulated ring base for easy installation
  • Insulated access cover for comprehensive waterside maintenance
  • Replaceable magnesium anode
  • Options:
    – Flexible magnesium anode for installation in confined areas
    – Powered anode for reduced maintenance requirements
    – Temperature and pressure valve with stainless steel spring set to 95°C and a maximum water pressure of (7 bar) 700 kPa
    – Analogue temperature gauge (0-120°C)
    – Electric element heat packs (15/30/45/60 kW)

    • The post IT appeared first on MARINE.

    ]]>         XLD https://marineqatar.com/product/xld/ Tue, 10 Aug 2021 06:07:20 +0000 https://marineqatar.com/?post_type=product&p=3294
  • With incoloy element of 4.5 kW, operating at 380-415 Volt, two elements operating simultaneous provinding 9 kW recovery capacity
  • 38 – 106 gallon capacity
  • Commercial light duty electric water heater

    • The post XLD appeared first on MARINE.

    ]]>
  • Immersion heating element. Standard supplied with incoloy element of 4.5 kW, operating at 380-415 Volt, two elements operating simultaneous provinding 9 kW recovery capacity
  • Surface mounted control thermostats with a temperature range from 48°C/120°F to maximum 77°C/170°F and hi-limit factory fixed setting at 88°C/190°F.
  • Thermostats are accurate to ± 2.5°C/5°F.
  • Diffuser dip tube carries incoming cold water from the top connection, to the bottom of the tank to minimize mixing with the hot water in the tank.
  • Helps reduce lime and sediment buildup while maximizing hot water output. Made from long-lasting PEX cross-linked polymer.
  • Our Coregard™ anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.
  • Durable, tamper-resistant brass drain valve
  • The internal pressure tank is constructed of heavy duty carbon steel.
  • Maximum working pressure is rated at 150psi/10bar. Test pressure per UL 174 std is 300psi/20bar.
  • Specially developed commercial grade glass coating protects steel tank from corrosion and maximizes tank life.
  • Factory installed, side-mounted, CSA/ASME certified T&P safety relief valve is standard on all models.
  • All models are equipped with factory installed heat traps on the inlet and outlet connections to improve energy efficiency.
  • Code compliance meets the Federal Energy Efficiency Standards according to the 2004 edition of the National Appliance Energy Conservation Act (NAECA) of 1992 and standby loss requirements of the U. S. Department of Energy and Current Edition of ASHRAE/IES 90.1.
  • Comply with UL 174, GSO, PAI and IEC 60335-2-21.

    • The post XLD appeared first on MARINE.

    ]]>         STE https://marineqatar.com/product/ste/ Tue, 10 Aug 2021 06:02:04 +0000 https://marineqatar.com/?post_type=product&p=3292 400 – 1000 models

    • 6 – 22.5 kW input
    • 405 – 1055 litre capacity

    1000 – 3000 models

    • 15 – 60 kW input
    • 1000 – 2820 litre capacity
    • Electric water heater for industrial and commercial applications

    The post STE appeared first on MARINE.

    ]]>     Features 400 – 1000
    • PermaGlas Ultra Coat second-generation glass coating technology prevents corrosion
    • Insulated ring base
    • Full NEODUL insulation with ABS cladding, compliant with current Ecodesign directive for A class heater efficiency
    • Replaceable magnesium anode
    • Temperature and pressure valve
    • Options:
      – Flexible magnesium anode for installation in confined areas
      – Powered anode for reduced maintenance requirements
      – Analogue temperature gauge (0-120°C)
      – Up to 3 heating elements can be installed for (back-up) electric water heating
    Features 1000 – 3000
    • Steel glass lined tank with glass lining for corrosion protection
    • Maximum working pressure 7 bar
    • Manhole 400mm
    • T&P relief valve factory supplied
    • Factory installed NEODUL insulation with ABS jacket, meeting new Ecodesign standards in Europe
    • Electric package with incoloy sheeted elements (15 to 60 kW)
    • Options:
      – Factory mounted heating package with control panel including main power disconnect door interlock switch, transformer for 230 Volt control circuit, contactors, step indication lights and override switch, immersion control and hi-limit thermostat
      – Temperature gauge
      – Build-in glass lined heat exchanger for use with additional heat source (solar,heat pump or boiler); model name will change to ITE.

    The post STE appeared first on MARINE.

    ]]>         Dura Power XL https://marineqatar.com/product/residential-electric/ Wed, 20 Jun 2018 07:25:44 +0000 https://marineqatar.com/product/fathers-day-coffee-mug/
  • 150 – 900 kW output
  • 150 – 2500 gallon capacity
  • Vertical and horizontal models with new advanced electronic control, provides + or – 1ºF temperature control

    • The post Dura Power XL appeared first on MARINE.

    ]]>
  • A. O. Smith’s new propriety advanced electronic water heater control, provides precise + or – 1ºF temperature control, which is ideal for industrial and food service applications where accurate hot water temperatures are needed.
  • Animated icons display detailed operational and diagnostic information.
  • Fault or alert messages appear if an operational issue occurs.
  • Factory standard on board low water cut-off uses a remote electronic immersion type probe to prevent energizing of the elements in the event of low water condition and eliminates accidental dry firing.
  • Progressive modulating matches number of elements to current load conditions. Rotates and lead lags element loads to provide long life and equal wear.
  • Control system automatically lowers the operating set point by a programmed value during user defined time periods. Seven-day clock may be programmed for night set back and or weekend shutdown to reduce operating cost and save money.
  • Modbus/BACnet compatible with optional Gateway interface.
  • Standard Permaglas glass lining. Exclusive process provides superior protection against corrosion in varying water conditions. Optional cement and epoxy linings.
  • All models are constructed to the requirements of ASME and are available in 125, 150 and 160 psi working pressures (125 psi working pressure – standard).
  • Heavy-duty elements have incoloy sheathing: provide excellent protection against oxidation and scaling. The input ranges from 15kW to 900kW (see accompanying chart).
  • Control and power circuit fusing to meet N.E.C.
  • Meets the standby loss requirements of the U.S. Department of Energy, NRCan and current edition of ASHRAE/IES 90.1.
  • Heavy duty UL rated for 100,000 cycles.
  • Color-coded circuitry for easier servicing
  • Anode rods for maximum corrosion protection
  • Standard voltages include 208, 240, 380, 400, 415, 480, 600 V single or threephase
  • Factory-installed terminal block(s)
  • Temperature and pressure relief valve, supplied but not installed
  • Can be specified with optional water to water or steam to water heat exchangers. Both single and double-wall heat exchangers are available.
  • Complete control packages can be factory-installed for hook-up and run capability.

    • The post Dura Power XL appeared first on MARINE.

    ]]>