Residential Water Heater Archives - MARINE https://marineqatar.com/product-category/water-heater/residential-water-heater/ TRADING & CONTRACTING Mon, 27 Dec 2021 14:12:11 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.3 https://marineqatar.com/wp-content/uploads/2021/10/cropped-site-icon-32x32.png Residential Water Heater Archives - MARINE https://marineqatar.com/product-category/water-heater/residential-water-heater/ 32 32 MEV & MEH https://marineqatar.com/product/mev-meh/ Tue, 10 Aug 2021 05:35:48 +0000 https://marineqatar.com/?post_type=product&p=3287
  • Wall hung electric water heater
  • 50 – 100 litre capacity
  • 1.2 – 2.5 kW input

    • The post MEV & MEH appeared first on MARINE.

    ]]>

    The water heater shall be A.O. Smith model — electric wall hung water heater. The water heater shall be rated for – kW and 220-240 Volts, single phase 50/60 Hz AC power supply. The storage capacity shall be 45/70/90 Liter. The water heaters tank will have a test pressure of 16 bar and a rated maximum working pressure of 8 bar. The tank shall be from steel fused with glass manufactured by A.O. Smith specially for use with water heaters to form an un-detachable lining. A magnesium anode will be provided for further protection of the tank. Inlet will be of stainless steel and incorporate a diffuser to prevent mixing of incoming cold water with hot water in the tank. The outlet pipe will be of stainless steel and draw from the top of the tank. The controls will include control thermostat and high temperature cut-off thermostat. The heating element will be made of incoloy. The water heater shall be supplied with combined pressure safety valve, check valve and drain valve with hose connection. Tank will have 5 year factory warranty against leakage, parts will have one year warranty.

    The post MEV & MEH appeared first on MARINE.

    ]]>         EJC https://marineqatar.com/product/ejc/ Tue, 10 Aug 2021 05:32:17 +0000 https://marineqatar.com/?post_type=product&p=3284
  • Commercial-grade residential water heater
  • 5.3 – 17.2 gallon capacity

    • The post EJC appeared first on MARINE.

    ]]>
  • Immersion heating element. Standard supplied with incoloy sheated element of 1.5 (6/10 Gallons) or 2.5 (20 Gallons) kW. Other element options are availably depending on local regulations in a range from 1.5 up to 4.5 kW.
  • Thermostats are accurate to ± 2.5°C/5°F.
  • Diffuser dip tube carries incoming cold water from the top connection, to the bottom of the tank to minimize mixing with the hot water in the tank. Helps reduce lime and sediment buildup while maximizing hot water output. Made from long-lasting PEX cross-linked polymer.
  • Our Coregard™ anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.
  • Durable, tamper-resistant brass drain valve
  • The internal pressure tank is constructed of heavy duty carbon steel.
  • Maximum working pressure is rated at 150psi/10bar. Test pressure per UL 174 std is 300psi/20bar.
  • Specially developed glass coating protects steel tank from corrosion and maximizes tank life.
  • Factory installed, side-mounted, CSA/ASME certified T&P safety relief valve is standard on all models.
  • Top-mounted T&P relief valve available as option on select models.
  • All models are equipped with factory installed heat traps on the inlet and outlet connections to improve energy efficiency.
  • Code compliance meets the Federal Energy Efficiency Standards according to the 2004 edition of the National Appliance Energy
  • Conservation Act (NAECA) of 1992. And also Meets the standby loss requirements of the U.S. Department of Energy and Current Edition of ASHRAE/IES 90.1.
  • Residential export water heaters comply with UL 174, SASO, GSO, PAI and IEC 60335-2-21.

    • The post EJC appeared first on MARINE.

    ]]>         Promax https://marineqatar.com/product/promax/ Mon, 09 Aug 2021 14:25:02 +0000 https://marineqatar.com/?post_type=product&p=3279
  • Residential electric water heater
  • 1.5 to 4.5 kW, rated 230 Volt
  • 28 – 106 gallon capacity

    • The post Promax appeared first on MARINE.

    ]]>
  • Commercial grade incoloy sheathed elements with Ni-Chrome resistance wire embedded in magnesium oxide. Range 1.5 to 4.5 kW, rated 230 Volt, suitable for 220-240 Volt power supply
  • Surface mounted control thermostats with a temperature range from 43°C/110°F to maximum 71°C/160°F and hi-limit factory fixed setting at 83°C/180°F.
  • Thermostats are accurate to ± 2.5°C/5°F.
  • Diffuser dip tube carries incoming cold water from the top connection, to the bottom of the tank to minimize mixing with the hot water in the tank. Helps reduce lime and sediment buildup while maximizing hot water output. Made from long-lasting PEX cross-linked polymer.
  • Our Coregard™ magnesium anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.
  • Durable, tamper-resistant brass drain valve
  • The internal pressure tank is constructed of heavy duty carbon steel.
  • Maximum working pressure is rated at 150psi/10bar. Test pressure per UL 174 std is 300psi/20bar.
  • Specially developed glass coating protects steel tank from corrosion and maximizes tank life.
  • Factory installed, side-mounted, CSA/ASME certified T&P safety relief valve is standard on all models.
  • All models are equipped with factory installed heat traps on the inlet and outlet connections to improve energy efficiency.
  • Code compliance meets the Federal Energy Efficiency Standards according to the 2004 edition of the National Appliance Energy Conservation Act (NAECA) of 1992 and the standby loss requirements of the U.S. Department of Energy and Current Edition of ASHRAE/IES 90.1.
  • Residential export water heaters comply with UL 174, GSO, PAI and IEC 60335-2-21.
  • Short models are available in a limited range

    • The post Promax appeared first on MARINE.

    ]]>